works.dunn.dev

Things we make.

Projects with the kids — RC trucks, water tables, tools, and contraptions. Built slowly, a few nights at a time, with a three-year-old and a one-year-old in the room.

Active

Research

Recent activity

  1. The Gravel Pit

    Geometry study went up — a scaled model of the footprint, excavation and gravel volumes, board-height freeboard, and a sun study for the corner.

  2. The Gravel Pit

    Phase II mud kitchen plans went up — a mud kitchen counter and a low sensory table for five drop-in stainless steam-table pans, drawn with a full cut list and bill of materials.

  3. Water Table

    Reframed: not a from-scratch table — a safe pump KIT for the Step2 table. Mains never touches the water; a 24V mag-drive pump runs dry in a crate.

  4. Water Table

    Pump, crate, and strainer ordered; fittings + tubing sourced — UV-proof silicone and 316L marine clamps, quality-picked because it lives outside.

  5. TRX-4M

    Went tall on tires — 62mm King Trekker A/T, picked for the chunky tread Alasdair likes. The IR40 clears up to 70mm and our terrain has big obstacles, so the deep gearing earns its keep.

  6. TRX-4M

    Axle settled on the +4mm Planet set — scale look, brass knuckles, no portal lift. The snow tracks turned out to be stock-axle-only, so they stay on the original beater; this build runs wheels.

  7. TRX-4M

    Plan locked. Scratch-building a second truck from INJORA parts; the original Traxxas stays bone stock for Alasdair to abuse.

  8. TRX-4M

    Added a tow-truck crane — the 6-channel T6M radio drives it off CH3/CH4. Beetle, pickup, and wrecker on one chassis.

  9. TRX-4M

    Foundation parts ordered: BUG18 body + LCG chassis, waterproof servo, brass shocks, sealed bearings.