Night 1 of 4 · next

The Rolling Chassis

Turn a box of parts into something that rolls and steers.

11

parts this night

5 / 11

already owned

6

to buy

3

Alasdair's age

4

jobs for him

The first night is the skeleton: chassis, gearbox, axles, links, shocks, and wheels. No motor, no radio — none of that matters if the truck can't roll straight and turn its wheels. By the end it sits on its tires, the suspension moves, and the steering swings by hand. It's recognizably a truck Alasdair can push across the floor, which for a three-year-old is the whole point of night one.

After this night: A complete rolling chassis. It sits on its wheels, the suspension articulates over a hand, the steering turns lock to lock. No power yet — that's Night 2 — but it's a truck he can push around and call his.

What we bought, and why

Planet axles, low and scale — not portals

Planet axles give a scale diff-housing look and brass knuckles down low for traction, and the +4mm set (4M-120) sits each wheel just enough proud for a clean body fit. I skipped portal axles on purpose: portals lift the whole truck taller, and a crawler drives better the lower it sits. We'd thought about going wider to clear a set of snow tracks — but those turned out to fit only the stock axles, so they live on the original beater instead. That frees this build to just be low, planted, and good-looking, on its wheels.

A complete transmission geared way down

The 4M-55 transmission runs 40.3:1 gears — a 59% underdrive. That sounds like a downgrade and it's the opposite: gearing down trades top speed for torque and control. A geared-down crawler creeps over obstacles and is far more forgiving of a heavy little thumb on the throttle. Slow is the feature.

High-Trail links, because the body sets the wheelbase

The BUG18 body and LCG chassis fix the wheelbase at 155mm (the "High-Trail / K10" length), not the stock 133mm. So the suspension links have to be High-Trail length too, or nothing lines up — the axles won't sit under the body. We only need the four-link chassis set here: the planet axles ship with their own steering links, so a combined link-and-steering set would pay for the steering link twice. Black anodized aluminum to match the chassis — the low weight that helps a crawler comes from the brass knuckles and wheels, not the links.

Brass shocks and heavy oil for a forgiving ride

The 59mm shocks have brass ends, putting weight at the lowest point on the truck — that drops the center of gravity right where it helps. Filled with heavy 50wt oil, they rebound slowly: when he drives off a step or tips into a corner, the suspension compresses and recovers in a slow, predictable way instead of bouncing him over. The right shape of forgiveness for a young driver.

Sealed bearings over stock bushings

The TRX-4M ships with plastic bushings, not bearings. The 22-piece sealed bearing kit replaces every one of them: less friction, smoother roll, and — because they're sealed — they keep water and grit out. That last part matters in Michigan, where this thing is going to see snow and puddles.

Brass beadlock wheels and tall, chunky tires

Brass wheels are heavy, and that's the point: weight at the wheels, down low, means grip and far fewer rollovers. The tires are tall — 62mm King Trekker all-terrains — because where we drive has obstacles big enough to hang a smaller tire up, and the IR40's open fenders clear up to 70mm, so there's room to go big. The blocky tread is half the reason: it bites on big rocks, and Alasdair likes the chunky texture of it — it's his truck, so that counts. The deep underdrive gearing swallows the taller tire without complaint. Beadlock rims mean they bolt on mechanically and won't peel off when he pushes sideways into a curb. The snow tracks we own go on the original stock truck — they slot tight onto the stock axles — so this build stays on wheels.

Bill of materials11 parts
  • LCG aluminum universal chassis (from the BUG18 kit)haveINJORA · The spine. Low center of gravity. Sized for a 155mm wheelbase.$55.99 (kit)
  • CNC aluminum complete transmission, 40.3:1 / 59% underdrivehaveINJORA · Geared down on purpose — slower and torquier.$27.99
  • +4mm Planet complete front + rear axles — scale diff housings, brass knucklesINJORA · +4mm/side for a clean body fit. No lift, stock 2:1 ratio. Includes its own steering link, so the suspension links are chassis-only.$76.99
  • Black hardened-steel High-Trail center driveshafts (155mm)INJORA · Transmission to each axle. High-Trail / K10 length for the 155mm wheelbase; black to match the chassis.$15.99
  • Black aluminum High-Trail chassis links (8pc)INJORA · Chassis links only — the steering links come with the planet axles. Black anodized to match.$18.99
  • 59mm brass & aluminum oil shocks (4)haveINJORA · Threaded preload, brass ends for weight at the lowest point.$25.97
  • Silicone shock oil, 50wt / 710csthaveTeam Losi Racing · Heavy oil for slow, forgiving rebound.$5.99
  • Steel sealed bearing kit, 22pchaveINJORA · Replaces stock bushings everywhere they live.$13.98
  • 1.0" Plus brass beadlock wheels (4)INJORA · Brass = weight down low. Beadlock = tires bolt on and stay on.$29.99
  • King Trekker A/T tires + inserts, 62×22mm (4)INJORA · Tall 62mm for clearance over big obstacles (IR40 clears up to 70mm); chunky tread Alasdair likes. Mounts the W1109 wheels.$21.99
  • Grade 12.9 stainless screw / hardware kitINJORA · Backfill and spares — small screws walk off the table.$13.99

Alasdair's jobs · age 3

He's three, so his jobs are the satisfying ninety seconds, not the fiddly hour. The plan:

  • Press the sealed bearings into the axles — that click is his to make.
  • Sort the screws by size into little cups before we start (and learn "the little one" vs "the big one").
  • Hand me parts when I ask for them.
  • Push the finished roller across the floor and watch the wheels turn — the first time the box of parts is a truck.