Phase 2 of 4 · next
The Crate
Build the pump into a portable box that never touches the water.
4
parts this phase
1 / 4
already owned
3
to buy
2
jobs for the kids
The pump and its controller live in a Sidio crate that sits on the ground next to the table — the whole "kit" is really this box. The pump bolts to the floor, the controller brick mounts to a wall, and the tubing and power cord pass through sealed glands. Lift the crate and the entire works comes away as one unit for winter.
After this phase: A vented, weatherproof box that holds the pump, the brain, and the plumbing penetrations — a lift-away kit, not a tangle on the grass.
The thinking
A vented PP crate, not a pump on the grass
The Sidio crate is polypropylene — chemically inert, drillable, weatherproof — with a slotted wall pattern that doubles as ready-made mounting points and vents that keep the motor cool and let moisture drain. It also makes the whole thing portable: built once, set up and torn down each season as a single object.
Cable glands, not just holes
Every penetration through the crate wall — two for tubing, one for the AC cord — goes through a PG13.5 cable gland, so the holes seal around what passes through them instead of letting weather and bugs in.
Bill of materials
- Sidio Full-Size cratehave—
- PG13.5 cable glands (white), 5-pack~$10
- Stainless M4 mounting hardware + washers~$3
- IEC C13 power cord, white, 6ft~$8
For the kids
Still a grown-up build, but there's a job or two:
- Help carry the finished crate out to the table.
- Find the slots in the crate wall where the bolts go.