Phase 4 of 4 · planned
First Flow
Prime it, run it, and let them splash.
0
parts this phase
0 / 0
already owned
0
to buy
3
jobs for the kids
Fill the table until water sits against the drain, prime the suction line, and power on at a low setting. Water draws from the drain, passes visibly through the strainer, gets pushed up and bubbles into the upper basin through both feeds, then flows down through the rain shower and the maze back to the drain. Dial the pump up until it's a fountain and not a flood.
After this phase: A fountain that runs all afternoon on the same few gallons, as fast or as gentle as the dial says.
The thinking
Prime once, then gravity keeps it going
The DCW-2500 wants its pump body and suction line full before the first start or it dry-run shuts off. Fill the table to operating level so water sits on the drain, top up the suction tube by hand if needed, and start it. After that the elevated table gravity-feeds the pump and it stays primed.
For the kids
This one's theirs:
- Pour the first water in to prime it.
- Push the speed button — slow trickle up to bubbling fountain.
- Splash.